Products - Gas detectors

PORTABLE GAS DETECTOR


GasAlertMicroClipXT (4 Gas w/o pump)
  • Gas sampling method: Natural diffusion
  • Gas sensor type: Catalytic and electrochemical
  • Detecting gas: Combustible gas, H2S, CO, O2
  • Simple one-button operation
  • Standard datalogger (16 hours) and eventlogger (10 events)
  • Powered by a lithium polymer battery
  • Provides 95 dB alarm tone and bright wide-angled alarm bars
  • Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
  • Four alarm levels: Instant Low and High Alarm for all gases;TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
  • Protection Grade: IP66/67

GasAlertMaxXT (4 Gas w/ pump)
  • Integrated sampling pump
  • SmartSample technology and powerful diaphragm pump provide reliable block detection and consistent, uniform flow
  • Easy-to-read, multi-language LCD displays all four gas concentrations (H2S, CO, O2 and combustibles) simultaneously
  • Visual, vibrating and audible alarm indicators
  • Low, High, TWA (time weighted average) and STEL (short-term exposure limit) alarms
  • Rechargeable batteries provide enough power for a 13-hour shift
  • Easy, one-button interface for simple operation
  • Flexible user options minimize training
  • LCD icons help with fast and easy notification of detector operation


Combustible LeakDetector
To detect combustible gas leaks in residential and small commercial applications. 
It is small, easy to use and has a 18" long flexible gooseneck for hard to reach areas.
  • Simple adjustable tick rate increases as the sensor tip approaches a leak
  • Audio and visual tick rate, fully adjustable
  • Easy one hand operation
  • Long 18" (45cm) gooseneck for hard to reach areas
  • 'Tip Light' in sensor cover illuminates the area of the leak
  • Rubber boot protects instrument
  • Sensor provides accurate detection 
  • Headphone jack
  • Separate battery compartment for quick and easy battery replacement

GasAlertExtreme (Single Gas Detector)

  • Single Gas monitor which detects one of the following gases: CO, H2S, O2, SO2, PH3, CL2, NH3, NO2, HCN, ETO, CLO2, O3, N
  • Multiple language and datalogging option
  • Rugged, IP-66/67 highly water-resistant design
  • Continuous LCD shows real-time gas concentration with backlight in low light (auto and on demand); in alarm (auto)
  • LOW, HIGH, TWA and STEL alarms with adjustable set points
  • Provides 95 dB tone and bright LED indication on alarm (typical)
  • Internal vibrating alarm
  • 2-year battery life (typical) with replaceable 3V camera battery
  • Simple auto-zero and calibration procedure
  • Full function self-test of: sensor, battery, and circuitry integrit
  •  Built-in concussion-proof boot
BW Technologies By Honeywell aims to be the leading supplier of gas detection equipment for the protection of personnel and facilities around the world.

www.gasmonitors.com.my

GasAlertClipExtreme (Maintenance Free Single Gas Detector)

  • Gas Detected: H2S, SO2, CO or O2
 
  • 2 year or 3 year maintenance free single gas detector
  • two alarm levels and an internal vibrator
  • Exceptionally low cost of ownership
  • Rugged, IP-66/67 highly water-resistant design
  • Records and displays the peak alarm encountered and the time since the exposure occurred
  • Provides typical 95 dB tone and bright, quad-LED indication on alarm
  • Internal vibrator alarm
  • Maintenance free—no sensor or battery replacement, no calibration, no downtime
  • Full function self-test of: audible/visual alarms plus integrity of sensor, battery and circuitry
  • Continuously ON—one button activation, test and data transmission
 
 

GasAlertMicro5 (5 Gases Detector)
Gas detected: VOC, CO2, H2S, CO, O2, SO2, PH3, NH3, NO2, HCN, Cl2, ClO2, O3, and combustibles
  • Integral concussion-proof boot
    • Optional integral motorized pump option for remote sampling
    • Powered by three AA alkaline batteries or a hot-swappable rechargeable battery pack
    • Triple alarms (audible, visual and vibrating)
    • Multi-language support in English, French, German, Spanish and Portuguese
    • Large, user selectable backlit LCD
    • Four alarm levels: Low, High, TWA and STEL
    • Compatible with MicroDock II Automatic Test and Calibration Station
    • Datalogging models store and recall event information
    • Wide range of user selectable field options including password protection, safe and stealth modes.

    FIXED GAS DETECTOR (COMMERCIAL)


    Carbon Monoxide Alarm 

    Features:

    • Motorola IC control, Reliable without false alarm
    • Field audio and visible alarm
    • Simple installation
    • Excellent reliability & high stability
    • Self test function
    • Durable sensor head
    • Less affected by other organic solvent
    • High Accuracy
    • CE and EN50291 Standard 

     

    Specifications:

    • Electrochemical sensor
    • Audible Alarm at 85db Horn
    • Operating voltage: 9VDC
    • Response time: 30s
    • Alarm level:150ppm CO±30%
    • Working temperature -10degree~60 degree

     


    Combustible Gas Alarm

    Combustible gas alarm, is designed to detect the concentration of combustible gas, adopts high-quality gas sensor with advanced technology and superior craft. It provides visual and audible signals when the gas concentration, such as LPG, natural gas, coal gas etc., reaches the preset level. It reminds you to take prompt favorable action. You may start up other link equipment, like opening windows or shutting off gas supply, to avoid fire, explosion, suffocation, and other malignant accidents. 

    Combustible Gas Alarm

    Gas alarm, is designed to detect the concentration of combustible, explosive natural and LPG gases, adopts high-quality gas sensor with advanced technology and superior craft. It provides visual and audible signals when the gas concentration reaches the presetting level. It reminds you to take prompt action. You may start up other link equipment, open windows or shut off gas supply to avoid fire, explosion, suffocation, and other malignant accidents.

    Fixed Gas Detector (Industrial)

    Flammable gas detector with display

    Flameproof (Exd) flammable gas detector, which uses poison-resistant pellistors to detect explosive levels of hydrocarbons, hydrogen and other flammable gases and vapours, including aviation fuel and leaded petrol vapours.
     

    Features:

    Non-intrusive calibration

    • Calibration can be performed locally without the need for hot work permits
    • Local display and magnetic key enable calibration without opening the junction box

    Flexible output options

    • A 4-20mA signal is provided
    • Optional alarm and fault relays are available to drive local alarm devices.
    • Sensor can be mounted remotely from the display/transmitter enclosure.

    Rugged and reliable

    • Constructed using highly durable marine-grade alloy with a tough polyester coating
    • Ingress protection to IP65 as standard, IP66 with accessory
    • Uses long-life poison resistant pellistors.

    Toxic and oxygen gas detector with display

    Intrinsically Safe (I.S.) toxic and oxygen gas detector with local LCD display. A very wide choice of sensors are available for use in a variety of applications.

    TXgard-IS+ is ATEX certified for use in Zone 0,1 or 2 hazardous areas, and also UL and cUL certified for use in Division 1 or 2 hazardous areas.
     

    Features:

    Non-intrusive calibration

    • Calibration can be performed locally without the need for hot work permits
    • Local display and buttons enable calibration without opening the junction box

    Flexible output options

    • A two-wire 4-20mA signal is provided
    • The output can be forced up without applying gas to enable simple checking of control systems and alarms.

    Rugged and reliable

    • Constructed using highly durable GRP to provide good impact resistance
    • Ingress protection to IP65 as standard
    • Uses long-life electrochemical cells
     
     
     

    Toxic and oxygen gas detector with display

    Flameproof (Exd) toxic and oxygen gas detector with local LCD display. A choice of sensors are available for use in a wide range of applications.
     

    Features:

    Non-intrusive calibration

    • Calibration can be performed locally without the need for hot work permits
    • Local display and magnetic key enable calibration without opening the junction box

    Flexible output options

    • A 4-20mA signal is provided
    • Optional alarm and fault relays are available to drive local alarm devices.

    Rugged and reliable

    • Constructed using highly durable marine-grade alloy with a tough polyester coating
    • Ingress protection to IP65 as standard, IP66 with accessory
    • Uses long-life electrochemical cells
     
     

    Infrared flammable gas detector

    Flameproof (Exd) infra-red flammable gas detector, which provides a cost effective solution for the protection of plant and personnel. It complies with standards world-wide and and is built to last in all manner of environmental conditions.

    Features:

    High reliability

    • Constructed using highly durable marine-grade alloy with a tough polyester coating
    • MTBF of 10 years
    • Detects gas with optical system obscured by up to 90%, ‘dirty optics’ warning is provided at 75% obscuration
    • IEC61508 SIL 2 compliant

    Simple maintenance

    • Local status light which identifies up to 22 detector conditions
    • Simple calibration either remotely, or locally using a PC.

    Flexible installation

    • Dual 4-20mA and RS-485 outputs ensure simple integration with new or existing installations.
    • Modbus serial link enables detectors to be multi-dropped, allowing addressable detectors to be controlled and interrogated remotely
    • Duct mounting accessory available
     
    Infrared Flammable Gas Detector
     
    Ultra-compact infrared (IR) gas detector which delivers rapid, fail-safe detection of hydrocarbon gases and vapours. The IRmax gas detection system offers the choice of a detector only, a local gas/status display, a remote gas/status display or non-intrusive calibration via an I.S. calibration tool or hand-held HART communicator.
     
    Fixed IR Display
    • Shows gas level and status information
    • Simple non-intrustive calibration
    • Hand-held HART commuinicator compatible
    Remote IR Display
    • Can be mounted up to 30 meters from IRmax
    • Monitor and calibrate without direct detector access
    • Choice of connection lead lengths

    I.S. Hand-Held Calibrator

    • Calibrate IRmax detectors not fitted with Fixed or Remote IR Displays
    • One I.S. calibrator per IRmax fleet
    • Intrinsically Safe; suitable for hazardous area use

    IRmax

    • Fast response
    • SIL 2 compliant
    • Wide range of gases
    Open Path IR and Flame
     
     
    Open Path IR or "line of sight" optical gas detectors offer reliable detection of hydrocarbon gas emmissions over large areas. OPIR detectors detect gas hazards ranging from low level Parts Per Million (PPM) levels to Lower Exposure Limit (LEL) levels in hazardous areas.

    Features:

    • Hydrocarbon and H2S versions available
    • Explosion proof to ATEX, UL and GOST-R Standards
    • Choice of models for ranges of 0.6m up to 140m
    • Aluminium or stainless steel construction
    • 4-20mA or RS-485 operation, with alarm and fault relays available
     

    Flame Detectors

    Supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult environmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms. 

     

                                  Detectors for flammable, toxic and oxygen gases

    The Xgard range offers a comprehensive selection of fixed point gas detectors that meet the diverse requirements gas detection in industries throughout the world. Intrinsically Safe (I.S.) or Flameproof (Exd) versions are available for a wide range of applications.
     
    Xsafe is a cost effective solution for flammable gas detection in safe areas such as boiler rooms, kitchens and commercial buildings.
     

    Xgard offers a wide range of sensors:

    • Poison resistant pellistors for flammable gas detection
    • Electrochemical sensors are used to detect toxic gases and oxygen
    • Thermal conductivity sensors to monitor volume concentrations of gases
             

     Infrared gas detector for flammable gases and carbon dioxide

    Xgard IR is an explosion-proof gas detector which uses a dual-wavelength infrared sensor to provide highly dependable detection of hazardous gases and vapours
     

    Xgard IR delivers the many advantages of IR technology in an affordable package:

    • Fail safe sensor technology
    • Immune to poisoning
    • No damage by over-gassing
    • Fast response
    • Does not need oxygen to work

    Xgard IR is also available for protecting personnel against toxic and asphyxiation hazards from carbon dioxide (CO2). CO2 presents a hazard in breweries, pubs and restaurants, laboratories, refrigeration plants, buildings on landfill sites, theaters, commercial kitchens and anywhere where it is used in a process or where personnel work in poorly ventilated environment.   

    Carbon Dioxide (CO2) Alarm                                                                                                      


    CO2 Monitor With Temperature and RH% Transmitting

    This 3-in-1 CO2 monitor is a desktop type unit designed for fast and accurate measurement of CO2 level, air temperature and humidity. Equipped with a triple LCD Display and programmable alarms complete with real time clock and calendar. It has a large LCD display and 15° tilt angle for easy reading. In addition, it has ABC (Automatic Baseline Calibration) and Manual Calibration option.

    The built-in Non-Dispersive InfraRed (NDIR) sensor provides long term stable monitoring. User can set 2 alarm limits: upper & lower limit. It has an audible & visual alarm to give warning when CO2 concentration exceeds the limit. Once CO2 level goes back to normal the alarm will automatically stop, alarm can be also be stop by pressing any key.

    Poor indoor air quality in rooms can lead to fatigue, lack of concentration and illness (Sick Building Syndrome) due to high CO2 concentration. IAQ monitoring and ventilation surveys of CO2 level & air ventilation become widely applied in public areas such as offices, classrooms, factories, hospitals, hotels.


    Portable CO2 Detector
     
    • Simplest carbon dioxide monitoring for ambient air
    • Highly accurate infra-red sensing technology
    • Inherently reliable, shockproof and weather protected
    • Proven Gasman technology
    • Intelligent sensors and self-checking functionality
    • Meets the requirements of toxic gas performance standard EN45544

    •  True one button operation
    •  Easy to read LCD display        with    backlight
    •  Clear indication of operating status
    •  30 days advance calibration due warning
    •  95dBA audible alarm
    •  Striking twin red/blue visual alarm
    •  Internal vibrating alarm
    •  2 levels of instantaneous alarm
    •  Time weighted average alarms


    CO2 monitor with optional O2 display
     
    Cost effective CO2 and Oxygen monitor you can trust.
    • Continuous monitoring for carbon dioxide in cellars and other confined spaces
    • Optional oxygen sensor to detect asphyxiation hazards due to nitrogen cylinder leaks
    •  Automatically turn on ventilation fans
    •  Factory set alarm levels
    •  Clear back-lit display for gas    readings
    •  Bright LEDs and loud, distinctive alarms
    •  Single button for routine operation and testing
    •  Plug-in repeater units complete with cable
    • Calibration unit with automatic sequencing
    • No specialist cabling required
    • IP65 protection against dust and water ingress
    • Tough polycarbonate case
    • Wide operating temperature range
    • Battery backup for mains failure (optional)
    • Dual-band infrared sensor for carbon dioxide
    • Only turn on ventilation fans when they are  needed
    • Long-term maintenance-free operation
    • Minimal sensor calibration requirements
    • Long-life sensors

    CO2 Monitors for Indoor Air Quality Control

    C02 Monitor with NDIR C02 Gas Sensor
    Includes Humidity and Temperature Display
    Application: C02 monitoring
    Indoor and outdoor air quality monitoring
    Display: C02 0-9999ppm
    Humidity:0-99% RH
    C02 sensor
    Range:0-9000ppm(can be specified)
    Accuracy:more or Less than 70ppm

    For some basic information on gas detectors, please visit http://en.wikipedia.org/wiki/Gas_detector.

    Gas Controller for car parking

    Gas controller is multi-point detection panel developed by our company used for car park and commercial use. It can connect our fixed gas detector CP01, GN Series. When the gas concentration reaches or exceeds the pre-set alarming levels, the controller immediately gives visible and audible alarming, which reminds us adopting safety measurement and start up the monitor to monitor the ventilation and other equipments. In this way, you can avoid poisoning, explosion and fire accruing. With digital display and keyboard operation, this system is easy to operate.

    Fixed Gas Detector

    ATEX Approved

    Features:
     
    • Target gas: Combustible gases and Toxic gases
    • Excellent repeatability
    • Hardly affected by the Term and Hum
    • High sensitivity and Long Life
    • Low drift and reliable performance
    • Small size and easy to install
    • 4-20mA or RS485 signal output
    • PCB protection design can reduce fault rate
    • Explosion proof design, suitable for hazardous place use
    For more information on gas detectors or gas analyzers, please visit the main website at http://ancor.com.my and http://ancor.com.my/Gas-Detection-System.php